1m 3″ Matt Black Vitreous Enamel Stove Flue Pipe (Pellet)

SHL pellet stove flue pipe is a matt black vitreous enamel connecting flue pipe which is used in Pellet stoves.

A 1 meter length of 3″ or 80mm matt black vitreous enamel stove flue pipe is generally used with a Pellet stove or biomass heater / boiler that has a 3″ or 80mm collar either at the top or back of outlet.

Generally, a stove fitter will use a coloured pipe such as a 1 meter length of 3″ or 80mm matt black vitreous enamel stove flue pipe because it will be visible and can be seen. This pipe is considered a decorative flue pipe.

A 1 meter length of 3″ matt black vitreous enamel stove flue pipe is normally used in one of three ways; fitted to another piece of 3″ or 80mm vitreous enamel stove flue pipe, to a length of 3″ flexible chimney liner with a manchette start-off adapter or to a twinwall rigid insulated flue system.

The male (narrow) end of the stove flue pipe should always be pointed downwards after fitting it. When two pieces of vitreous enamel stove flue pipe are joined they should have a tight seal thanks to the high temperature rubber gasket.

In our opinion (SHL Distributors Ltd), it is not advised to expose more that 2 meters of matt black vitreous enamel stove flue pipe as this can reduce chimney draught because the flue gases will begin to cool down as the pipe is uninsulated. For more information about stove, insert or range fittings, please click on the Resources above to download the 2014 Irish Building Regulations governing Heat Producing Appliances and their correct installation.

The wall thickness of SHL matt black vitreous enamel stove flue pipe is 1.8mm in total, rated to 600 degrees C and has a 10 year warranty. Please view the 1 meter 3″ matt black vitreous enamel stove flue pipe images to see actual product measurements.