Modified Static 50% Chimney Draught Reducer

The 50% Modified Static Chimney Draught Reducer is designed to restrict the flow of smoke / fumes exiting from your chimney pot by up to 50%.

In turn, this flow restriction slows down the rate at which;

– Fuel burns in your stove, insert , range or fireplace.

– Air moves across your room towards the stove or fireplace.

The 50% Modified Static Chimney Draught Reducer is very useful when your stove, insert, range or fireplace is over performing and burning too fast or excessively draughting up the chimney

Warning:

A chimney fitted with a 50% Modified Static Chimney Draught Reducer must be cleaned more regularly than a chimney without. The reason for this is that a chimney fitted with the 50% Modified Static Chimney Draught Reducer suffers from a more rapid soot build-up up than one without. A greater quantity of soot collecting on the walls of a chimney, especially towards the top of a chimney (as is the case when a 50% Modified Static Chimney Draught Reducer is fitted) is more likely to ignite as excess soot build-up is a fire hazard and can cause a chimney fire.

It is imperative that anyone using this product sweeps their chimney more often.

The 50% Modified Static Chimney Draught Reducer will cause a draught restriction in the flue regardless of whether it is windy or calm outside. This is important because most instances of an over performing stove, insert, range or fireplace / chimney occur in windy conditions where wind moving across the top of the chimney pot causes suction in the flue (through the Venturi Effect) and increases up draught. The Venturi Effect has little effect in calm weather, therefore, up draught is not as severe.

With the above paragraph in mind, with calm weather, the 50% Modified Static Chimney Draught Reducer could cause smoke, fumes and Carbon Monoxide to escape from your stove or fireplace and we strongly recommend that you fit a carbon Monoxide alarm in conjunction with this product.

The 50% Modified Static Chimney Draught Reducer will also do the following;

Shields the chimney from light wind / air currents coming from any direction preventing down draught causing smoke to escape from the fireplace, insert, stove or range.

Highly effective at stopping the wind from entering the chimney in situations of occasional and not severe downdraught. If the problem is severe you need to install a Spinner Anti Down Draught Chimney Cowl.

The circular shape gives an exceptionally fast response to any air movement.

Protects the chimney from moisture ingress and nesting birds.

Very effective at preventing driving rain.

Suited to stove installations

Technical:

Robust stainless steel construction and suitable for use with solid fuel.

When fitted correctly, the 50% Modified Static Chimney Draught Reducer will not detach regardless of wind strength.

Manufactured to BS EN1856-1:2009, CE Marked.

Guaranteed against faulty materials and workmanship.

Competes successfully with any rival product on build quality, durability and most notably, price!

With no moving parts, the 50% Modified Static Chimney Draught Reducer is a sure bet for many years of a trouble-free chimney. For ease of mind, we offer a 1 year guarantee on its workmanship & materials.

What the 50% Modified Static Chimney Draught Reducer will not do:

It does not allow you to regulate or increase or decrease the draught as the chimney cowl is non-adjustable. If you wish to be able to regulate how much draught there is present in your chimney, you need to install a Chimney Control. However, the Chimney Control is not suitable for stove installations and can only be used with an open fireplace.

This chimney cowl will not prevent a very severe and continuous downdraught in your chimney – the Spinner Anti Downdraught Chimney Cowl will prevent this.

This chimney cowl will not prevent a downdraught when there is no wind – if the problem still exists when there is no wind (in conditions such as cold, calm and frost) the problem is a lack of draught and an electric chimney cowl is required such as the Super C Electric Fan Cowl. No anti downdraught chimney cowl can solve a lack of draught.

Will not prevent a down draught if the chimney is more than 4 feet lower than the apex of the roof or 4 feet lower and in proximity to a taller structure, hedge, or tree(s)

Fitting:

Will fit most standard 8”-9” chimney pots – the 50% Modified Static Chimney Draught Reducer base diameter is 8” or 200mm.

Leg length is 105mm