Aluminium Flashing Unit EPDM (Small)

This Pitched EPDM Aluminium Roof Flashing Unit measures;

Length: 20 3/4″ / 605mm

Width: 20″ / 510mm

It can be used with pipe sizes ranging from 3″ / 80mm up to 8″ / 200mm in diameter.

It is constructed from aluminium with a wall thickness of 0.6mm and EPDM rubber (Ethylene Propylene Diene Monomer)

Tested Temperature Ratings as follows;

Intermittent: 135 degrees Centigrade.

Continuous: 100 degrees Centigrade.

If a higher temperature rating is required (perhaps because your roof is quite low or outside wall temperature of your pipe is high) we suggest you purchase a Silicone flashing unit instead.